;--------------------------------------------------------------------------\
; ADCP Command File for use with VmDas software.
; 
; ADCP type:     75 Khz Ocean Surveyor 
; Setup name:    for Meteor 160 in 2019
; Setup type:    High resolution, short range profile (Broadband)
; 
; NOTE:  Any line beginning with a semicolon in the first 
;        column is treated as a comment and is ignored by 
;        the VmDas software.
;
; NOTE:  This file is best viewed with a fixed-point font (e.g. courier).
; Modified Last: 12Dec2019
;--------------------------------------------------------------------------/

; Restore factory default settings in the ADCP
cr1

; set the data collection baud rate to 115200 bps, 
; no parity, one stop bit, 8 data bits
; NOTE:  VmDas sends baud rate change command after all other commands in 
; this file, so that it is not made permanent by a CK command.
cb811

; Set for broadband single-ping profile mode (WP), 100 (WN) 8 meter bins (WS), 
; 4 meter blanking distance (WF), 390 cm/s ambiguity vel (WV)
NP000
WP001
WN128
WS0500
WF0300
;WV390

; Disable single-ping bottom track (BP), 
; Set maximum bottom search depth to 1200 meters (BX)
BP000
;BX12000

; output velocity, correlation, echo intensity, percent good
WD111100000

; Ping as fast as possible
TP000000

; Since VmDas uses manual pinging, TE is ignored by the ADCP
; and should not be set.
;TE0000000

; Set to calculate speed-of-sound, no depth sensor, external synchro heading 
; sensor, no pitch or roll being used, no salinity sensor, use internal transducer 
; temperature sensor
EZ1020001

; Output beam data (rotations are done in software)
EX00000

; Set transducer misalignment (hundredths of degrees).
; Ignored here but set in VmDAS options.
;EA04500

; Set transducer depth (decimeters)
ED00050

; Set Salinity (ppt)
ES35

; save this setup to non-volatile memory in the ADCP
CK